LatestTechnology

OZONE TECHNOLOGY : OZFIL™

In order to treat drinking water efficiently certain process criteria have to be met: A given amount of ozone must be introduced to the process water and, after introduction, there must be sufficient residence time in order to give the ozone time to work.

The OZFIL™ product incorporates all of the components required to produce and dose ozone to the process water: air dryer for the feed gas preparation; OZAT® ozone generator; motive water pump and injector system; stainless steel contact chamber for a residence time of at least four minutes; automatic degassing valve with vent ozone destruct unit; residual ozone analyser; flow meter; circulation bypass; control system and all skid interconnections.

HOW IT WORKS

Ozonation ensures a very high product quality resulting in a long shelf life. A dose of ozone in the range of 0.3 mg/l to 0.5 mg/l, is sufficient to sanitise the product and the product packaging.

After this, the ozone will have oxidised the organic substances and the microbial activity will have been reduced to a minimum.